Two Point Power Press
Other details:
Applicable to large and heavy tonnage die tooling with multiple precision stages in blanking, piercing, bending forming for single for progressive application. Wide bolster and slide area. These presses are most suitable for automoblie components & white good industry.
- Rigid frame design ensures less vibration and low noise, increasing tool life improves product accuracy.
- Hydraulic overload protection.
- full length, high precision 8-point gib with bronze liners for accurate slide guidance.
- Automactic recirculating lubrication with progressive block.
- Pneumatic high torque wet clutch and brake unit with sintered multi-disc linings provides low noise, long life operation with minimal maintenance.
- Long stroke drawing and blanking operations.
- Automatic Recirculating Lubrication System
- Hydraulic Overload Protection System
- Dual Height Indicator
- Air Counter Balancer System
- Digital Crank Angle Indicator
- 8 Point Rotary cam Switch
- Product Counter
- Batch Counter
- Misfeed Sockets
- Air Outlet
- Control Console
- Combination Clutch & Brake
- Large Lockable Emergency Stop Buttom
- Die Light Device
- Safety Fence
- Ladder
- Oprating Stand
- Die Cushion
- Photoelectric Safety Device
- Variable Speed Motor
- Flywheel Brake and Main Motor FWD/REV Controller
- Load Tonnage Monitor
- Quick Die Change System
- Anti Vibration Mounts
- Moving Bolster
- Knockout Device
Technical Details:
| Model | SDC-250 | SDC-320 | SDC-400 | SDC-500 | SDC-630 | SDC-800 | |||||||
| S | H | S | H | S | H | S | H | S | H | S | H | ||
| Capacity | Tonne | 250 | 320 | 400 | 500 | 630 | 800 | ||||||
| Length of Stroke | mm | 300 | 150 | 300 | 200 | 400 | 250 | 450 | 250 | 450 | 250 | 450 | 300 |
| Speed Fixed | spm | 25 | 40 | 20 | -- | 20 | -- | 15 | -- | 15 | -- | 12 | -- |
| Variable Speed | spm | 25-35 | 30-60 | 15-25 | 25-50 | 15-25 | 25-50 | 12-20 | 25-50 | 12-20 | 25-50 | 10-18 | 20-40 |
| Rating Point | mm | 9 | 6.5 | 13 | 6.5 | 13 | 6.5 | 13 | 6.5 | 13 | 6.5 | 13 | 6.5 |
| Die Height | mm | 630 | 630 | 700 | 700/800 | 700/800 | 800 | ||||||
| Slide Adjustment | mm | 200 | 200 | 250 | 250 | 250 | 300 | ||||||
| Bolster Area | mm | 1800x1200 | 2200x1370 | 2500x1400 | 2500x1550 | 2800x1550 | 3100x1550 | ||||||
| mm | 2200x1200 | 2500x1370 | 2800x1400 | 2800x1550 | 3100x1550 | -- | |||||||
| Slide Area | mm | 1600x1100 | 2200x1200 | 2500x1400 | 2500x1550 | 2800x1550 | 3100x1550 | ||||||
| mm | 2100x1100 | 2500x1200 | 2800x1400 | 2800x1550 | 3100x1550 | -- | |||||||
| Bolster Thickness | mm | 180 | 190 | 190 | 190 | 250 | 250 | ||||||
| Window Opening | mm | 800x400 | 100x500 | 1100x650 | 1200x650 | 1300x650 | 1300x650 | ||||||
| Air Counter Balance Capacity | kg | 2800 | 3000 | 4000 | 4500 | 5000 | 5500 | ||||||
| Air Pressure Required | kg/cm2 | 5 | 5 | 5 | 5 | 5 | 5 | ||||||
| Floor to Top of Bolster with Pit | mm | 850 | 850 | 850 | 850 | 850 | 850 | ||||||
| Main Motor | HP | 25 | 30 | 40 | 50 | 75 | 100 | ||||||
| Type of Die Cushion |
| Bellow | Cylinder | Cylinder | Cylinder | Cylinder | Cylinder | ||||||
| Capacity | Tonne | 28 | 55 | 60 | 80 | 80 | 80 | ||||||
| Length of Stroke | mm | 150 | 150 | 200 | 220 | 220 | 220 | ||||||
| Area of Cushion Pad | mm | 1400x800 | 1700x900 | 2000x900 | 2000x950 | 2300x950 | 2600x950 | ||||||
| mm | 1800x800 | 2000x8 | 2300x900 | 2300x950 | 2600x950 | -- | |||||||
