Universal Nibbling Machine
Other details:
The PARADISE PN series Sheet Metal Nibbing Machine is a rugged, sturdy and reliable multipurpose machine capable of sheet cuting & forming operations. Its verstility is best expressed by terming it the Sheet Metal Workers lathe. The working principle on which nibbling operates is hte sheet is cut or formed between the fast reciprocating motion of an upper tool (powered by an electric motor and driven by an ecentric crank) and a stationery lower tool, by progressive punching, as the sheet is fed.
- Holders with Figure Cutting Bits
- Electric Motor with Push Button Starter Provided With Overload Trip
- Set of Operation Keys and Spanners
- Capacity Chart for Ms Sheet & Instruction Manual
- Tow Slides for Attachment Mounding
- Set of Tool Holdurs with Figure Cutting Bits
- Electric Motor
- Push Button Starter Provided With Over Load Trip
- Set of Operating Keys
- Set of Operating Spanners
- Anti Vibration Pads
- Hand Pushed Straight Feeding Attachment
- Outside Circle Cutting Attachment
- Nside Circle Cutting Attachment
- Nibbling Tool
- Louver Cutting Tool
- Beading Tool
- Rectangular Notching Tool
- Flanging Tool
- Slot Cutting Tool
- Punching Tool
- Folding Tool
Technical Specifications:
|
| Model | PN-3 | PN-5 | PN-8 | |
|
| Capacities | M. Steel 45 kg./mm2 | M. Steel 45 kg./mm2 | M. Steel 45 kg./mm2 | |
| Straight Cutting | From the edge | mm | 3.2 | 5 | 8 |
| Inside with starting hole | mm | 3.2 | 5 | 8 | |
| Sheet without starting hole | mm | 2.5 | 4 | 6 | |
| Figure Cutting | Sheet thickness | mm | 1.5 | 2 | 2.5 |
| Louver Cutting | Sheet thickness | mm | 2.25 | 3 | 4 |
| Nibbling | From the edge | mm | 2.5 | 4 | 6 |
| Inside with starting hole | mm | 2.5 | 4 | 6 | |
| Sheet without starting hole | mm | 2 | 3 | 4 | |
| Slot Cutting | Sheet thickness/width of slot | mm | 2.5/8 | 4/10 | 5/10 |
| Rect Cutting | Sheet thickness/width of notch | mm | 2.8 | 3/10 | 4/12 |
| Folding | Sheet thickness/depth of fold | mm | 2/6 | 2.5/8 | 3/10 |
| Beading | Sheet thickness/depth of bead | mm | 2/4 | 2.5/5 | 3/6 |
| Flanging | Sheet thickness/height of flange | mm | 2/8 | 3/12 | 3/15 |
| Dishing | Sheet thickness | mm | 2 | 2.5 | 3 |
| Machine Specifications | |||||
| Throal depth | mm | 900 | 1000 | 1250 | |
| Minimum circle dia. Cut from square blanks | mm | 740 | 830 | 1000 | |
| Net weight approximate | Kgs. | 700 | 1600 | 2200 | |
| Length of stroke | mm | 1 to 8 | 1.5 to 9 | 2 to 10 | |
| No. of strokes per minute | No. | 1440 | 1440 | 720/1440 | |
| Maximum tool lift | mm | 15 | 15 | 25 | |
| Motor 3 Phase | H.P. | 2 | 3 | 5 | |
